› Low temperature annealing enhancing the magnetocaloric response of FeMnNiGeSi HEAs - Álvaro Díaz-García, Universidad de Sevilla
12:10-12:30 (20min)
› Opportunities and Challenges for Soft Magnetic Composite in E-mobilities - Zhou Ye, EMT, Höganäs AB, SE-26383, Höganäs
12:30-12:50 (20min)
› Hydrodynamic simulations of magnetic nanoparticles nanoassemblies for magnetic biosensing - Pablo Palacios Alonso, Instituto IMDEA Nanociencia [Madrid], Departamento de Física Teórica de la Materia Condensada [Madrid]
12:50-13:10 (20min)
› A modified Arctangent Hysteresis Model for Residual Stress Description - Ahmed Nait Ouslimane, Université Mouloud Mammeri [Tizi Ouzou] - meziane hamel, Université M\'Hamed Bougara Boumerdes - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany
14:10-15:40 (1h30)
› Assessment of magnetoelastic resonance parameters retrieval for sensor applications - Beatriz Sisniega, Universidad del Pais Vasco / Euskal Herriko Unibertsitatea [Espagne]
14:10-15:40 (1h30)
› Core loss reduction through a laser treatment on Fe-based amorphous ribbon surface for transformer cores - Naoki Ito, Hitachi Metals, Ltd.
14:10-15:40 (1h30)
› Discriminating the physical impacts of various laser pulses on the magnetic structure of oriented electrical steels - olivier Maloberti, Laboratoire des technologies innovantes - UR UPJV 3899, UNILASALLE Amiens
14:10-15:40 (1h30)
› Effect of Sheet Slitting on the Energy Loss of Laser-Scribed Grain - Oriented Fe-Si - Gheorghe Paltanea, University Politehnica of Bucharest
14:10-15:40 (1h30)
› Effects of clinching and welding on iron loss distribution in hybrid motor cores - hiroyasu shimoji, Oita university Faculty of science and technology, Oita Industrial Research Institute
14:10-15:40 (1h30)
› Experimental Off-diagonal GMI sensor temperature drift versus theoretical modelling - Mamaye Inès Corréa, Ecole superieure polytechnique de dakar (esp-ucad) - Papa Silly Traore, Ecole superieure polytechnique de dakar (esp-ucad) - Olivier Mareschal, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen - Christophe Dolabdjian, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen
14:10-15:40 (1h30)
› Fast Domain Walls in Magnetostrictive Amorphous Nanowires - Tibor-Adrian Óvári, National Institute of R&D for Technical Physics
14:10-15:40 (1h30)
› Flux density waveform control based on Newton-Rhapson method - Clémentine Delaunay, Ampère
14:10-15:40 (1h30)
› Full permeability tensor identification for numerical simulation of GOES - Leysmir A. Mirabal, EDF - R&D Département ERMES, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 (L2EP)
14:10-15:40 (1h30)
› High throughput analysis of combinatorially sputtered soft magnetic metallic glasses using MOKE - Julia Löfstrand, Uppsala Universitet [Uppsala]
14:10-15:40 (1h30)
› Influence of cutting clearance on the magnetic properties in non-oriented electrical steel - Ján Füzer, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia
14:10-15:40 (1h30)
› Influence of plastic compression on the magnetic behaviour of a pipeline steel - zakariae Maazaz, Laboratoire de mécanique et technologie - Olivier Hubert, Laboratoire de mécanique et technologie - Olivier de la Barriere, Systèmes et Applications des Technologies de lÍnformation et de lÉnergie
14:10-15:40 (1h30)
› Influence of volumetric energy density on the magnetic properties of FeSi6.5 alloy prepared by SLM technology - Adrian Radon, Łukasiewicz Research Network - Institute of Non-Ferrous Metals
14:10-15:40 (1h30)
› Investigation on optimal building factor as a function of core geometry and operational flux density - Sudheer Mokkapaty, SGB-SMIT Group (SBG), Neumark, - Ahmed Gamil, SGB-SMIT Group (SGB), Regensburg, - Timo Overboom, SGB-SMIT Group (Royal SMIT), Nijmegen,
14:10-15:40 (1h30)
› J-H loop tracer for demagnetization-corrected hysteresis measurements of cylinders and rectangular prisms - Markus Kuhnt, Institut Dr. Foerster GmbH & Co. KG
14:10-15:40 (1h30)
› Local Magnetic Characterization of Electromagnetic Pulse Treated Metal: an Inhomogeneous Measurement - Plantevin Loup, Laboratoire Ampère
14:10-15:40 (1h30)
› Local Magnetic Properties of Shear Cut Non-Oriented Electrical Steel Sheets - Fabian Hummel, Department of Materials Science & Engineering, Institute I: General Materials Properties, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen
14:10-15:40 (1h30)
› Magnetic behaviour of GOES wound cores of transformers fed by square or sine voltages - Daniel Roger, Univ. Artois, ER4025, Laboratoire Systèmes Electrotechniques et Environnement - LSEE
14:10-15:40 (1h30)
› Magnetic Hysteresis: A Reliable Technique for Condition Monitoring of Magnetic Cores - Hamed Hamzehbahmani, Durham University
14:10-15:40 (1h30)
› Magnetic Properties and Barkhausen Noise Evolution during FeSiCuNbB Nanocrystalline Materials Ageing - Rania SAOUDI, Laboratoire Ampère - Laurent Morel, Laboratoire Ampère - Marie-Ange Raulet, Laboratoire Ampère - benjamin Ducharne, Laboratoire de Génie Electrique et Ferroélectricité
14:10-15:40 (1h30)
› Magnetic Property Measurement and Analysis on Temperature Dependence of High-Frequency Magnetic Materials Under Non-sinusoidal Excitation - Ming Yang, State Key Lab. of Reliability and Intelligence of Electric Equipment，Hebei University of Technology
14:10-15:40 (1h30)
› Magneto-optical characterization of grain oriented SiFe lamination under rotational magnetic field -
14:10-15:40 (1h30)
› Magnetoquasistatic Multiscale Modelling of SMC Materials Using EH-Conforming Formulation and Multiharmonic Method - Janne Ruuskanen, Tampere University
14:10-15:40 (1h30)
› MIM-like Additive Manufacturing of Fe3%Si magnetic materials - Vincent MARTIN, Laboratoire de Mécanique, Multiphysique, Multiéchelle, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697
14:10-15:40 (1h30)
› Mn-Zn ferrite nanoparticles ink for inkjet printing - Alexandr Laposa, Czech Technical University in Prague
14:10-15:40 (1h30)
› Modelling of iron loss evolution due to magnetic ageing in FeSi electrical steels - Meryeme JAMIL, Laboratoire d'Électrotechnique et d'Électronique de Puissance - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - Abdelkader Benabou, Laboratoire d'Électrotechnique et d'Électronique de Puissance
14:10-15:40 (1h30)
› New Formulation of Dynamic LS Model for Accurate Iron Loss Modeling at High B and dB/dt - Anh Tuan VO, Laboratoire de Génie Electrique de Grenoble
14:10-15:40 (1h30)
› Next generation electrical traction machines: material investigation for optimal machine performance - Sigrid Jacobs, ArcelorMittal
14:10-15:40 (1h30)
› Optimization of the signal to noise ratio for fundamental mode orthogonal fluxgate magnetometer based on amorphous wires - Tibu Mihai, National Institute of Research and Development for Technical Physics Iasi
14:10-15:40 (1h30)
› Sensitivity and noise of parallel fluxgate sensor with amorphous wire cores - Diana Hrakova, Faculty of Electrical Engineering, Czech Technical University in Prague
14:10-15:40 (1h30)
› Soft magnetic properties of the ultrarapidly annealed (Fe64Co21B15)99Cu1 high-Bs alloy - Branislav Kunca, Institute of Experimental Physics, Slovak Academy of Sciences
14:10-15:40 (1h30)
› Temperature First Order Reversal Curves (TFORC) distributions of magnetocaloric materials - Luis M. Moreno-Ramírez, Universidad de Sevilla
14:10-15:40 (1h30)
› Transverse LVDT Position Sensor with Nanocrystalline Core - Vaclav Grim, Czech Technical University in Prague
14:10-15:40 (1h30)
› Vector Hysteresis Measurement of the Magneto-Mechanical Coupling at Different Angles between Magnetization and Mechanical Stress - Benedikt Schauerte, Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany
14:10-15:40 (1h30)
› Influence of Si-Si pairs on stress annealing performance - Mateus Dias, Department of Metallurgical and Materials Engineering, Universidade de São Paulo, Brazil - Fernando Landgraf, Department of Metallurgical and Materials Engineering, Universidade de São Paulo, Brazil
16:50-17:10 (20min)
› Analysis of magnetic properties degradation following industrial impregnation process - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697
17:10-17:30 (20min)
› Establishment of the Standard Method of Magnetostriction Measurement of Grain-oriented Electrical Steel Strip and Sheet - Stefan Siebert, Brockhaus Measurements, Lüdenscheid, 58507, Germany
17:30-17:50 (20min)
› Modelling of stator sheets punching effect on EV motor performances - Patrick LOMBARD, Altair
17:50-18:10 (20min)
› Mechanically strong and ductile soft magnet with ultralow coercivity - liuliu Han, Max-Planck-Institut für Eisenforschung GmbH
18:10-18:30 (20min)
› Lessons Learnt - Additive Manufacturing of Iron Cobalt Based Soft Magnetic Materials - Tomi Lindroos, VTT Technical Research Centre of Finland Ltd.
09:10-09:30 (20min)
› Domain structure and magnetic properties of glass-coated Fe-based microwires - Valeria Kolesnikova, Immanuel Kant Baltic Federal University
09:30-09:50 (20min)
› Magnetic losses and aftereffect in Ni-Zn ferrites - Samuel Dobák
09:50-10:10 (20min)
› Evaluation of IPM motor using newly-developed Si-gradient steel (JNRF) - Yoshiaki Zaizen, JFE Steel Corporation
10:10-10:30 (20min)
› Fe-Co soft magnetic nanowires for cancer cell destruction by magneto-mechanical actuation - Horia Chiriac, National Institute of Research and Development for Technical Physics
11:40-12:00 (20min)
› FexCo1-x alloy nanoparticles: synthesis, structure, magnetic characterization and magnetorheological application - JON GUTIERREZ, Universidad del Pais Vasco / Euskal Herriko Unibertsitatea [Espagne]
12:00-12:20 (20min)
› High-Moment Films Produced by Depositing Gas-Phase Nanoparticles - Raúl Lopez-Martin, Universidad de Castilla-La Mancha
12:20-12:40 (20min)
› Fibres-based SMCs prepared via cold sintering - Bogdan Viorel Neamtu, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105, Muncii Avenue, 400641, Cluj-Napoca,
12:40-13:00 (20min)
› A comparison between ABC method and PSO method for Hysteresis Parameter determination - Dounia Sedira, Laboratoire d'étude et de modélisation en électrotechnique, Faculté des sciences et de la technologie,Université Mohamed Seddik Ben Yahia, BP98, Jijel 18000, Algeria - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany - Afef Kedous-Lebouc, Univ. Grenoble Alpes, CNRS, Grenoble INP, G2Elab, F-38000 Grenoble, France21 avenue des Martyrs CS 90624, Grenoble 38031, France
14:00-15:30 (1h30)
› A New Hysteresis Model for characterising Grain- Oriented Electrical Steels - Hamed Hamzehbahmani, Durham University
14:00-15:30 (1h30)
› About the exothermic nanocrystallisation of FeCuNbSiB cores - Olivier Geoffroy, Univ. Grenoble Alpes, G2Elab, CNRS, France
14:00-15:30 (1h30)
› Broadband losses and their interpretation in thin GO sheets - Alessandro Sola, Istituto Nazionale di Ricerca Metrologica
14:00-15:30 (1h30)
› Characterization of the magneto-plastic behavior of electrical steels - Mathieu Domenjoud, Laboratoire Génie électrique et électronique de Paris
14:00-15:30 (1h30)
› Dependence of magnetic properties of hybrid SMC material on temperature - Sviatoslav Vovk, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia
14:00-15:30 (1h30)
› Determination of Demagnetizing Factors for Complex Geometries using an Iterative Numerical Approach - ETSE Kokouvi, Laboratoire Génie électrique et électronique de Paris
14:00-15:30 (1h30)
› Determination of the magnetic degradation profil on the cutting-edge of punched electrical steels - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697
14:00-15:30 (1h30)
› Effect from Cutting Techniques on Local Magnetic Properties of Electrical Steel - Paul Mallett, MAGMA, Cardiff University School of Engineering
14:00-15:30 (1h30)
› Effect of composition on the transverse susceptibility in multiferroic Z-type hexaferrite nanoparticles - pablo hernandez-gomez, Universidad de Valladolid
14:00-15:30 (1h30)
› Effects of Pulsed Laser Ablation with various patterns on Non-Oriented Electrical Steels Magnetic Properties - Prescillia Dupont, SYMADE - UniLaSalle Amiens, Laboratoire des Technologies Innovantes (EA 3899) - UPJV, Jeumont Electric
14:00-15:30 (1h30)
› Equivalent Circuit Based Model for Mn-Zn Ferrites Taking into Account the Resonance Behaviour - Reda Elkhadrawy, Tampere University, Unit of Electrical Engineering.
14:00-15:30 (1h30)
› Evaluation of the stability of a digital GMI magnetometer - Aktham Asfour, Laboratoire de Génie Electrique de Grenoble
14:00-15:30 (1h30)
› Experimental study of a GOES lamination stack under 3D flux path - Leysmir A. Mirabal, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 (L2EP), EDF - R&D Département ERMES
14:00-15:30 (1h30)
› Field annealing effect of Fe-Si-B-P-Cu-C ribbons and its application to distribution transformer core - YASUO OKAZAKI, Gifu University
14:00-15:30 (1h30)
› Fractional differential material law and fractional diffusion equation for local ferromagnetic lamination hysteresis simulation - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité
14:00-15:30 (1h30)
› Influence of stress-relieving methods on the structure and properties of 3D printed FeSi6.5 - Bartosz Jóźwik, Łukasiewicz Research Network - Institute of Non-Ferrous Metals
14:00-15:30 (1h30)
› Interrelation of mechanical properties and magneto-mechanical coupling of non-oriented electrical steel - Nora Leuning, Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany
14:00-15:30 (1h30)
› Investigating laser patterns for GOES submitted to misoriented flux with 2D model, identifications and prototyping - Théo Etifier, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 - Elias Salloum, UNILASALLE Amiens
14:00-15:30 (1h30)
› Magnetic and Magnetocaloric properties of Ho2FeMnO6 nanopowder - Kiran Shinde, Hanbat National University, South Korea
14:00-15:30 (1h30)
› Magnetic and structural evolution of ultra-rapidly annealed highly inductive Fe75.3Ni10Cu0.7B14 alloy - Maciej Kowalczyk, Faculty of Materials Science and Engineering, Warsaw University of Technology
14:00-15:30 (1h30)
› Magnetic Properties Measurement and Comparative Analysis for Soft Magnetic Materials Under Complex Non-Sinusoidal Excitation - Shenghui Mu, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology - Ming Yang, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology
14:00-15:30 (1h30)
› Magneto-induced viscoelastic and plastic flow behavior of carbonyl iron silicon oil-based magnetorheological fluid - Chandra Shekhar Maurya, Indian Institute of Technology Patna, PhD student
14:00-15:30 (1h30)
› Magnetocaloric response in bulk Ni(Co)MnTi Heusler alloys - Victorino Franco, Universidad de Sevilla
14:00-15:30 (1h30)
› Manganese-Zinc Ferrite processed by Digital Light Processing for Power Electronics Application - Alexandre Harmon, Univ. Grenoble Alpes, CEA-LITEN DTNM
14:00-15:30 (1h30)
› Measurement of Magnetic Properties of Nanocrystalline Alloys under High Frequency Pulse Excitation - Min Zhang, Hebei University of Technology [Tianjin]
14:00-15:30 (1h30)
› Mechanical stress estimation through classical and magnetic Barkhausen noise energy hysteresis cycle - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité
14:00-15:30 (1h30)
› Modeling and Measurement of Magneto-Mechanical characteristics in transformer-cores - Elias Salloum, Laboratoire des Technologies Innovantes (LTI), SYMADE - UniLaSalle Amiens
14:00-15:30 (1h30)
› Modeling of the morphic effect using a 1st-order transitional magneto-elastic energy - Julien Taurines, Ecole Normale Supérieure Paris-Saclay
14:00-15:30 (1h30)
› Morphology and Magnetic Properties of Rapidly Quenched Fe-B Alloys - Evangelos Hristoforou, Laboratory of Electronic Sensors, National TU of Athens
14:00-15:30 (1h30)
› New laminated magneto-electric composites - Gabriel Ababei, National Institute of Research and Development for Technical Physics
14:00-15:30 (1h30)
› Non-destructive magnetic flux leakage characterization using non-linear GMI effect - Beato-López J. Jesús, Departamento de Ciencias, Institute for Advanced Materials and Mathematics INAMAT2 Universidad Pública de Navarra, 31006 Pamplona
14:00-15:30 (1h30)
› Origins of the joint losses in GOES magnetic cores - Ronan Corin, Laboratoire Systèmes Electrotechniques et Environnement
14:00-15:30 (1h30)
› Powder loading rate impact on the performances of soft magnetic materials produced by injection moulding - ULRICH SOUPREMANIEN, Université Grenoble Alpes - CEA LITEN
14:00-15:30 (1h30)
› Relationship between the parameters of the hysteresis loop in a soft magnetic material - Vladimir Tsepelev, Ural Federal University [Ekaterinburg]
14:00-15:30 (1h30)
› Soft magnetic composite core properties in normalized representation. - Lajos K. Varga, Wigner Center for Physics, Institute for Solid State Physics and Optics
14:00-15:30 (1h30)
› Soft magnetic composites based on Sendust nanocrystalline powder with Fe3O4 nanoparticles - Traian Florin Marinca, Department of Materials Science and Engineering
14:00-15:30 (1h30)
› Surface magnetic properties of domain structure – thickness dependent behaviour of oriented electrical steels - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899
14:00-15:30 (1h30)
› The Stoner-Wohlfarth model: an analytical approach - Carlo Appino, Istituto Nazionale di Ricerca Metrologica
14:00-15:30 (1h30)
› Soft magnetic Fe-Sn-B nanocrystalline alloys prepared by rapid annealing - Ivan Skorvanek, Institute of Experimental Physics, Slovak Academy of Sciences
16:40-17:00 (20min)
› Tuning magnetocaloric properties in the vast high-entropy alloy space - Jia Yan Law, Universidad de Sevilla
17:00-17:20 (20min)
› 3D printed magnetic-non-magnetic layered structures - Kocsis Bence, Széchenyi István University
17:20-17:40 (20min)
› Design and modelling of a controlled saturable inductor for an LCC-S compensated WPT system - Luigi Solimene, Politecnico di Torino [Torino]
17:40-18:00 (20min)
› Electric current effects in AMR sensors - Guillermo Gestoso Basque Center for Materials, Applications and Nanostructures, Spain
09:10-09:30 (20min)
› Microscopic Magnetic Domain Structure of GOES at the Vicinity of and On the Laser Lines Post-Laser Treatment with Different Pulse Durations - Manar Nesser, Laboratoire des technologie innovantes
09:30-09:50 (20min)
› Electrical steel tensile stresses and plastic strains observation through magnetic incremental permeability and eddy current magnetic signature - Shurui Zhang, Graduate School of Engineering, Tohoku University, Sendai, Japan, Tohoku University, Institute of fluid science IFS, Sendai, Japan. - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité
09:50-10:10 (20min)
› Permeability of amorphous magnetic ribbon - Nikolai Perov, Immanuel Kant Baltic Federal University, Lomonosov Moscow State University
10:10-10:30 (20min)
› Influence of compressive stress on the high-frequency power loss of MnZn ferrite - Yao Ying, Research Center of Magnetic and Electronic Materials, College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China
10:30-10:50 (20min)
› 2D magnetoplasmonic crystals NiFe/Si3N4: fabrication and magneto-optical properties - Christina Gritsenko, University of Pavol Jozef Šafárik, Immanuel Kant Baltic Federal University
11:20-12:50 (1h30)
› 3D printed magnetic metal specimens and their structural characterization - Evangelos Hristoforou, Laboratory of Electronic Sensors, National TU of Athens
11:20-12:50 (1h30)
› A setup for the measurement of the GMI response of amorphous wires under tensile stress - Aktham Asfour, Laboratoire de Génie Electrique de Grenoble
11:20-12:50 (1h30)
› Analytical investigation in 3MA linear and non-linear eddy current methods - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany
11:20-12:50 (1h30)
› Characterising non-oriented electrical steel under complex magnetising conditions - Alexander Washbourne, Cardiff University
11:20-12:50 (1h30)
› CIM-like Additive Manufacturing for soft magnetic Mn-Zn ferrite materials - Vincent MARTIN, Laboratoire de Mécanique, Multiphysique, Multiéchelle, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 - Fréderic Gillon, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697
11:20-12:50 (1h30)
› Considering the Mean Path Length on Modelling of Reluctance Actuator for Precision Motion Systems - Kaitlyn Kuchinkaa, Memorial University of Newfoundland - Alatawneh Natheer, Memorial University of Newfoundland - Mohammad Aljanaideh, Memorial University of Newfoundland
11:20-12:50 (1h30)
› Correlation between NDT signatures of steels and their tensile properties - Marwane Dherbécourt, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697, Centre de Recherche VALLOUREC
11:20-12:50 (1h30)
› Design and analysis of electromagnetic suspension for hyperloop - Sigrid Jacobs, ArcelorMittal - Johan Rens, ArcelorMittal
11:20-12:50 (1h30)
› Determination of the magnetic degradation profil on the cutting-edge of punched electrical steels - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697
11:20-12:50 (1h30)
› Determining the order of thermomagnetic phase transitions in low-hysteretic La(Fe,Mn,Si)13 - Victorino Franco, Universidad de Sevilla
11:20-12:50 (1h30)
› Effect of Bending Deformations on Magnetic Properties and Texture Evolution of Fe-Si electrical steels. - Ivan Petryshynets, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, Košice, 04001, Slovakia
11:20-12:50 (1h30)
› Effect of external DC field on anisotropic nanocrystalline ring core - Pavel Ripka, Czech Technical University in Prague
11:20-12:50 (1h30)
› Fe-Cr-Nb-B soft magnetic particles transported by ADSC for cancer treatment - Anca Emanuela Minuti, Faculty of Physics, "Alexandru Ioan Cuza" University, 11 Carol I Boulevard, Iași, 700506, Romania, National Institute of Research and Development for Technical Physics
11:20-12:50 (1h30)
› Frequency study of nanocrystalline Ni3Fe/Cr composites obtained by mechanical milling and spark plasma sintering - Florin popa, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105, Muncii Avenue, 400641, Cluj-Napoca,
11:20-12:50 (1h30)
› From Ring to Stator Core Evaluation - Avo Reinap, Div. Industrial Electrical Engineering and Automation
11:20-12:50 (1h30)
› High frequency application of ultrafine amorphous soft magnetic composites - Li Wangchang, Zhejiang University of Technology
11:20-12:50 (1h30)
› High-frequency characterization of Fe-based nanocrystalline cores - Ferenc Zámborszky, Magnetec-Ungarn Kft.
11:20-12:50 (1h30)
› Identification of Dynamic Magnetic and Electric Circuit models for Inductors - Elias Salloum, Laboratoire des Technologies Innovantes (LTI), SYMADE - UniLaSalle Amiens
11:20-12:50 (1h30)
› Importance of the microstructure of soft magnetic materials for their magnetic behavior - Thomas Kresse, Aalen University
11:20-12:50 (1h30)
› Influence of biaxial stress on magnetostriction – experiments and modelling - Olivier Hubert, Laboratoire de mécanique et technologie
11:20-12:50 (1h30)
› Influence of the Winding System on the Measurement Accuracy for Characterising Soft Magnetic Materials - Christoph Dobler, Johannes Kepler Universität Linz
11:20-12:50 (1h30)
› Influence of thermal and magnetic couplings on magnetocaloric effect in multiphase stacked sample made of La(FeMnSi)13-Hx alloys - Tomasz Przerywacz, Lodz University of Technology, Department of Semiconductor and Optoelectronics Devices, Politechniki Av. 10, 90-924 Łódź, Poland - Roman Gozdur, Łódź University of Technology, Department of Semiconductor and Optoelectronics Devices
11:20-12:50 (1h30)
› Investigation of the Nernst Effect in soft ferromagnetic materials - Łukasz Bernacki, Department of Semiconductor and Optoelectronics Devices, Lodz University of Technology
11:20-12:50 (1h30)
› Magnetic Footprint of Groups of Magnetotactic Bacteria - David de Cos, Department of Physics, University of the Basque Country UPV/EHU, 01006 Vitoria-Gasteiz - Nerea Lete, Department of Electricity and Electronics, University of the Basque Country UPV/EHU, 48940 Leioa, Spain - María Luisa Fdez-Gubieda, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain, Department of Electricity and Electronics, University of the Basque Country UPV/EHU, 48940 Leioa, Spain - Alfredo García-Arribas, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain, Department of Electricity and Electronics, University of the Basque Country UPV/EHU, 48940 Leioa, Spain
11:20-12:50 (1h30)
› Magnetic Material Sprayed by Plasma - Pavel Ctibor, Faculty of Electrical Engineering, Czech Technical University in Prague, Institute of Plasma Physics of the CAS [Prague]
11:20-12:50 (1h30)
› Magnetic property degradation of electrical steel due to coupled heat and stress - Paul Mallett, MAGMA, Cardiff University School of Engineering
11:20-12:50 (1h30)
› Magnetic Thin Band Sensors – Synopsis of Development - Georgi Shilyashki, TU Wien, Institute EMCE (354)
11:20-12:50 (1h30)
› Magnetodielectric materials for VHF antenna devices tunable by a low DC magnetic field - Jean-Luc MATTEI, Laboratoire des sciences et techniques de l'information, de la communication et de la connaissance
11:20-12:50 (1h30)
› Micromagnetic modelling of magnetostriction under uniaxial stress - Inna Lobanova, University Grenoble Alpes
11:20-12:50 (1h30)
› Modeling and Analysis of Asymmetrical Air Gaps of Reluctance Actuators for Nano-Positioning Systems - Mohammad Aljanaideh, Memorial University of Newfoundland
11:20-12:50 (1h30)
› New investigation in Loss Surface model to consider dynamic magnetization's history - Arnaud Cariou, Laboratoire de Génie Electrique de Grenoble, IRT Saint Exupéry - Institut de Recherche Technologique
11:20-12:50 (1h30)
› Non-destructive magnetic flux leakage characterization using non-linear GMI effect - Beato-López J. Jesús, Departamento de Ciencias, Institute for Advanced Materials and Mathematics INAMAT2 Universidad Pública de Navarra, 31006 Pamplona
11:20-12:50 (1h30)
› Optimization of Specimen Shape for Investigation the Influence of Mechanical Stress on Soft Magnetic Material Properties - Gereon Goldbeck, Johannes Kepler Universität Linz
11:20-12:50 (1h30)
› Perpendicular magnetocrystalline anisotropy of the Co2Fe0.4Mn0.6Si Heusler alloy thin films of different thicknesses - Oleksandr Chumak, Institute of Physics, Polish Academy of Sciences
11:20-12:50 (1h30)
› Relative control of domains structure and phases in electrical steels by laser process parameters and patterns - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899
11:20-12:50 (1h30)
› Soft magnetic composite cores produced by spark plasma sintering from pseudo core-shell powders like Me@MeFe2O4 type - Ionel Chicinas, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave.
11:20-12:50 (1h30)
› Stress Analysis via pancake Eddy Current Technology - meziane hamel, Université M\'Hamed Bougara Boumerdes
11:20-12:50 (1h30)
› The effect of laser scribing spacing on core loss of grain oriented electrical steel - Adriano Alex de Almeida, Research Center Aperam South America
11:20-12:50 (1h30)
› The role of materials in the optimal design of magnetic components for power converters - Luigi Solimene, Politecnico di Torino [Torino]
11:20-12:50 (1h30)
› Time-resolved observations of a domain wall distrotions induced by torsion - Richter Kornel, Pavol Jozef Šafárik University
11:20-12:50 (1h30)
› First-Order Reversal Curve Approach to Soft Magnetic Ferrite-Bonded Iron Composites - Samuel Dobák, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia
14:30-14:50 (20min)
› Application development of the Fe50Ni50 alloy - Thierry WAECKERLE, APERAM Alloys Imphy - Yanick ATEBA BETANDA, APERAM Alloys - Alain DEMIER, APERAM Alloys
14:50-15:10 (20min)
› Optimal Use of the GOES Easy Magnetisation Direction in PMSM Segmented Magnetic Circuit - Abderrahmane REBHAOUI, Laboratoire Systèmes Electrotechniques et Environnement, Institut VEDECOM
15:10-15:30 (20min)
Loading... 
AUDITORIUM PLATINE
https://smm25.sciencesconf.org/data/program/SigridJacobs.pdf
