Provisional Planning
| Time |
Event |
(+)
|
|
17:00 - 18:30
|
REGISTRATION - Registration |
|
|
18:30 - 20:30
|
WELCOME SESSION - Welcoming Participants and Cocktail |
|
| Time |
Event |
(+)
|
|
08:00 - 09:00
|
WELCOME - Welcoming Participants |
|
|
09:00 - 09:20
|
OPENING TALK (AUDITORIUM PLATINE) - Afef Kedous-Lebouc |
|
|
09:20 - 10:00
|
Material investigation for the next generation electrical traction machines (AUDITORIUM PLATINE) - Sigrid JACOBS |
|
|
10:00 - 11:00
|
ORAL SESSION N°1 (AUDITORIUM PLATINE) |
(+)
|
|
10:00 - 10:20 |
› Characterization of electrical steel deterioration due to combined punching and elastic stress - Anouar Belahcen - Aalto University - Department of Electrical Engineering and Automation |
|
|
10:20 - 10:40 |
› Composition engineering of ultra-soft-magnetic Co-based alloys - Hasan Ahmadian Baghbaderani - Tyndall National Institute [Cork] |
|
|
10:40 - 11:00 |
› Novel Measuring Concept for Determining the Chemical Composition of Bulk Materials in Industry - Daniel Woeckinger - Johannes Kepler University Linz |
|
|
11:00 - 11:30
|
Coffee break (PALLADIUM) |
|
|
11:30 - 12:10
|
Ferromagnetic shape memory Heuslers: a journey from bulk to nano (AUDITORIUM PLATINE) - Franca ALBERTINI |
|
|
12:10 - 13:10
|
ORAL SESSION N°2 (AUDITORIUM PLATINE) |
(+)
|
|
12:10 - 12:30 |
› Low temperature annealing enhancing the magnetocaloric response of FeMnNiGeSi HEAs - Álvaro Díaz-García, Universidad de Sevilla |
|
|
12:30 - 12:50 |
› Opportunities and Challenges for Soft Magnetic Composite in E-mobilities - Zhou Ye, EMT, Höganäs AB, SE-26383, Höganäs |
|
|
12:50 - 13:10 |
› Hydrodynamic simulations of magnetic nanoparticles nanoassemblies for magnetic biosensing - Pablo Palacios Alonso, Instituto IMDEA Nanociencia [Madrid], Departamento de Física Teórica de la Materia Condensada [Madrid] |
|
|
13:10 - 14:10
|
Lunch (TITANE) |
|
|
14:10 - 15:40
|
POSTER SESSION N°1 (PALLADIUM) |
(+)
|
|
14:10 - 15:40 |
› A modified Arctangent Hysteresis Model for Residual Stress Description - Ahmed Nait Ouslimane, Université Mouloud Mammeri [Tizi Ouzou] - meziane hamel, Université M\'Hamed Bougara Boumerdes - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany |
|
|
14:10 - 15:40 |
› Assessment of magnetoelastic resonance parameters retrieval for sensor applications - Beatriz Sisniega, Universidad del Pais Vasco / Euskal Herriko Unibertsitatea [Espagne] |
|
|
14:10 - 15:40 |
› Core loss reduction through a laser treatment on Fe-based amorphous ribbon surface for transformer cores - Naoki Ito, Hitachi Metals, Ltd. |
|
|
14:10 - 15:40 |
› Discriminating the physical impacts of various laser pulses on the magnetic structure of oriented electrical steels - olivier Maloberti, Laboratoire des technologies innovantes - UR UPJV 3899, UNILASALLE Amiens |
|
|
14:10 - 15:40 |
› Domain Observation of Grain-Oriented Electrical Steel Sheets - Morris Lindner, INNOVENT e.V. - Timmy Reimann, INNOVENT e.V. - Benjamin Wenzel, Matesy GmbH - Rocco Holzhey, INNOVENT e.V. |
|
|
14:10 - 15:40 |
› Effect of Sheet Slitting on the Energy Loss of Laser-Scribed Grain - Oriented Fe-Si - Gheorghe Paltanea, University Politehnica of Bucharest |
|
|
14:10 - 15:40 |
› Effects of clinching and welding on iron loss distribution in hybrid motor cores - hiroyasu shimoji, Oita university Faculty of science and technology, Oita Industrial Research Institute |
|
|
14:10 - 15:40 |
› Experimental Off-diagonal GMI sensor temperature drift versus theoretical modelling - Mamaye Inès Corréa, Ecole superieure polytechnique de dakar (esp-ucad) - Papa Silly Traore, Ecole superieure polytechnique de dakar (esp-ucad) - Olivier Mareschal, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen - Christophe Dolabdjian, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen |
|
|
14:10 - 15:40 |
› Fast Domain Walls in Magnetostrictive Amorphous Nanowires - Tibor-Adrian Óvári, National Institute of R&D for Technical Physics |
|
|
14:10 - 15:40 |
› Flux density waveform control based on Newton-Rhapson method - Clémentine Delaunay, Ampère |
|
|
14:10 - 15:40 |
› Full permeability tensor identification for numerical simulation of GOES - Leysmir A. Mirabal, EDF - R&D Département ERMES, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 (L2EP) |
|
|
14:10 - 15:40 |
› High throughput analysis of combinatorially sputtered soft magnetic metallic glasses using MOKE - Julia Löfstrand, Uppsala Universitet [Uppsala] |
|
|
14:10 - 15:40 |
› Influence of cutting clearance on the magnetic properties in non-oriented electrical steel - Ján Füzer, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia |
|
|
14:10 - 15:40 |
› Influence of plastic compression on the magnetic behaviour of a pipeline steel - zakariae Maazaz, Laboratoire de mécanique et technologie - Olivier Hubert, Laboratoire de mécanique et technologie - Olivier de la Barriere, Systèmes et Applications des Technologies de lÍnformation et de lÉnergie |
|
|
14:10 - 15:40 |
› Influence of volumetric energy density on the magnetic properties of FeSi6.5 alloy prepared by SLM technology - Adrian Radon, Łukasiewicz Research Network - Institute of Non-Ferrous Metals |
|
|
14:10 - 15:40 |
› Investigation on optimal building factor as a function of core geometry and operational flux density - Sudheer Mokkapaty, SGB-SMIT Group (SBG), Neumark, - Ahmed Gamil, SGB-SMIT Group (SGB), Regensburg, - Timo Overboom, SGB-SMIT Group (Royal SMIT), Nijmegen, |
|
|
14:10 - 15:40 |
› J-H loop tracer for demagnetization-corrected hysteresis measurements of cylinders and rectangular prisms - Markus Kuhnt, Institut Dr. Foerster GmbH & Co. KG |
|
|
14:10 - 15:40 |
› Local Magnetic Characterization of Electromagnetic Pulse Treated Metal: an Inhomogeneous Measurement - Plantevin Loup, Laboratoire Ampère |
|
|
14:10 - 15:40 |
› Local Magnetic Properties of Shear Cut Non-Oriented Electrical Steel Sheets - Fabian Hummel, Department of Materials Science & Engineering, Institute I: General Materials Properties, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen |
|
|
14:10 - 15:40 |
› Magnetic behaviour of GOES wound cores of transformers fed by square or sine voltages - Daniel Roger, Univ. Artois, ER4025, Laboratoire Systèmes Electrotechniques et Environnement - LSEE |
|
|
14:10 - 15:40 |
› Magnetic Hysteresis: A Reliable Technique for Condition Monitoring of Magnetic Cores - Hamed Hamzehbahmani, Durham University |
|
|
14:10 - 15:40 |
› Magnetic Properties and Barkhausen Noise Evolution during FeSiCuNbB Nanocrystalline Materials Ageing - Rania SAOUDI, Laboratoire Ampère - Laurent Morel, Laboratoire Ampère - Marie-Ange Raulet, Laboratoire Ampère - benjamin Ducharne, Laboratoire de Génie Electrique et Ferroélectricité |
|
|
14:10 - 15:40 |
› Magnetic Property Measurement and Analysis on Temperature Dependence of High-Frequency Magnetic Materials Under Non-sinusoidal Excitation - Ming Yang, State Key Lab. of Reliability and Intelligence of Electric Equipment，Hebei University of Technology |
|
|
14:10 - 15:40 |
› Magneto-optical characterization of grain oriented SiFe lamination under rotational magnetic field |
|
|
14:10 - 15:40 |
› Magnetoquasistatic Multiscale Modelling of SMC Materials Using EH-Conforming Formulation and Multiharmonic Method - Janne Ruuskanen, Tampere University |
|
|
14:10 - 15:40 |
› MIM-like Additive Manufacturing of Fe3%Si magnetic materials - Vincent MARTIN, Laboratoire de Mécanique, Multiphysique, Multiéchelle, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 |
|
|
14:10 - 15:40 |
› Mn-Zn ferrite nanoparticles ink for inkjet printing - Alexandr Laposa, Czech Technical University in Prague |
|
|
14:10 - 15:40 |
› Modelling of iron loss evolution due to magnetic ageing in FeSi electrical steels - Meryeme JAMIL, Laboratoire d'Électrotechnique et d'Électronique de Puissance - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - Abdelkader Benabou, Laboratoire d'Électrotechnique et d'Électronique de Puissance |
|
|
14:10 - 15:40 |
› New Formulation of Dynamic LS Model for Accurate Iron Loss Modeling at High B and dB/dt - Anh Tuan VO, Laboratoire de Génie Electrique de Grenoble |
|
|
14:10 - 15:40 |
› Next generation electrical traction machines: material investigation for optimal machine performance - Sigrid Jacobs, ArcelorMittal |
|
|
14:10 - 15:40 |
› Optimization of the signal to noise ratio for fundamental mode orthogonal fluxgate magnetometer based on amorphous wires - Tibu Mihai, National Institute of Research and Development for Technical Physics Iasi |
|
|
14:10 - 15:40 |
› Sensitivity and noise of parallel fluxgate sensor with amorphous wire cores - Diana Hrakova, Faculty of Electrical Engineering, Czech Technical University in Prague |
|
|
14:10 - 15:40 |
› Soft magnetic properties of the ultrarapidly annealed (Fe64Co21B15)99Cu1 high-Bs alloy - Branislav Kunca, Institute of Experimental Physics, Slovak Academy of Sciences |
|
|
14:10 - 15:40 |
› Temperature First Order Reversal Curves (TFORC) distributions of magnetocaloric materials - Luis M. Moreno-Ramírez, Universidad de Sevilla |
|
|
14:10 - 15:40 |
› Transverse LVDT Position Sensor with Nanocrystalline Core - Vaclav Grim, Czech Technical University in Prague |
|
|
14:10 - 15:40 |
› Vector Hysteresis Measurement of the Magneto-Mechanical Coupling at Different Angles between Magnetization and Mechanical Stress - Benedikt Schauerte, Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany |
|
|
15:40 - 16:10
|
Coffee break (PALLADIUM) |
|
|
16:10 - 16:50
|
Recent development in processing and application of Fe-6.5%Si soft magnetic material (AUDITORIUM PLATINE) - Gaoyuan OUYANG |
|
|
16:50 - 18:30
|
ORAL SESSION N°3 (AUDITORIUM PLATINE) |
(+)
|
|
16:50 - 17:10 |
› Influence of Si-Si pairs on stress annealing performance - Mateus Dias, Department of Metallurgical and Materials Engineering, Universidade de São Paulo, Brazil - Fernando Landgraf, Department of Metallurgical and Materials Engineering, Universidade de São Paulo, Brazil |
|
|
17:10 - 17:30 |
› Analysis of magnetic properties degradation following industrial impregnation process - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 |
|
|
17:30 - 17:50 |
› Establishment of the Standard Method of Magnetostriction Measurement of Grain-oriented Electrical Steel Strip and Sheet - Stefan Siebert, Brockhaus Measurements, Lüdenscheid, 58507, Germany |
|
|
17:50 - 18:10 |
› Modelling of stator sheets punching effect on EV motor performances - Patrick LOMBARD, Altair |
|
|
18:10 - 18:30 |
› Mechanically strong and ductile soft magnet with ultralow coercivity - liuliu Han, Max-Planck-Institut für Eisenforschung GmbH |
|
| Time |
Event |
(+)
|
|
08:00 - 08:30
|
WELCOME - Welcoming Participants |
|
|
08:30 - 09:10
|
Additive manufacturing of soft magnetic materials and components (AUDITORIUM PLATINE) - Dagmar GOLL |
|
|
09:10 - 10:30
|
ORAL SESSION N°4 (AUDITORIUM PLATINE) |
(+)
|
|
09:10 - 09:30 |
› Lessons Learnt - Additive Manufacturing of Iron Cobalt Based Soft Magnetic Materials - Tomi Lindroos, VTT Technical Research Centre of Finland Ltd. |
|
|
09:30 - 09:50 |
› Domain structure and magnetic properties of glass-coated Fe-based microwires - Valeria Kolesnikova, Immanuel Kant Baltic Federal University |
|
|
09:50 - 10:10 |
› Magnetic losses and aftereffect in Ni-Zn ferrites - Samuel Dobák |
|
|
10:10 - 10:30 |
› Evaluation of IPM motor using newly-developed Si-gradient steel (JNRF) - Yoshiaki Zaizen, JFE Steel Corporation |
|
|
10:30 - 11:00
|
Coffee break (PALLADIUM) |
|
|
11:00 - 11:40
|
Biomedical Applications of magnetoactive smart materials: You are what you synthesize (AUDITORIUM PLATINE) - Pedro MARTINS |
|
|
11:40 - 13:00
|
ORAL SESSION N°5 (AUDITORIUM PLATINE) |
(+)
|
|
11:40 - 12:00 |
› Fe-Co soft magnetic nanowires for cancer cell destruction by magneto-mechanical actuation - Horia Chiriac, National Institute of Research and Development for Technical Physics |
|
|
12:00 - 12:20 |
› FexCo1-x alloy nanoparticles: synthesis, structure, magnetic characterization and magnetorheological application - JON GUTIERREZ, Universidad del Pais Vasco / Euskal Herriko Unibertsitatea [Espagne] |
|
|
12:20 - 12:40 |
› High-Moment Films Produced by Depositing Gas-Phase Nanoparticles - Raúl Lopez-Martin, Universidad de Castilla-La Mancha |
|
|
12:40 - 13:00 |
› Fibres-based SMCs prepared via cold sintering - Bogdan Viorel Neamtu, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105, Muncii Avenue, 400641, Cluj-Napoca, |
|
|
13:00 - 14:00
|
Lunch (TITANE) |
|
|
14:00 - 15:30
|
POSTER SESSION N°2 (PALLADIUM) |
(+)
|
|
14:00 - 15:30 |
› A comparison between ABC method and PSO method for Hysteresis Parameter determination - Dounia Sedira, Laboratoire d'étude et de modélisation en électrotechnique, Faculté des sciences et de la technologie,Université Mohamed Seddik Ben Yahia, BP98, Jijel 18000, Algeria - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany - Afef Kedous-Lebouc, Univ. Grenoble Alpes, CNRS, Grenoble INP, G2Elab, F-38000 Grenoble, France21 avenue des Martyrs CS 90624, Grenoble 38031, France |
|
|
14:00 - 15:30 |
› A New Hysteresis Model for characterising Grain- Oriented Electrical Steels - Hamed Hamzehbahmani, Durham University |
|
|
14:00 - 15:30 |
› About the exothermic nanocrystallisation of FeCuNbSiB cores - Olivier Geoffroy, Univ. Grenoble Alpes, G2Elab, CNRS, France |
|
|
14:00 - 15:30 |
› Broadband losses and their interpretation in thin GO sheets - Alessandro Sola, Istituto Nazionale di Ricerca Metrologica |
|
|
14:00 - 15:30 |
› Characterization of the magneto-plastic behavior of electrical steels - Mathieu Domenjoud, Laboratoire Génie électrique et électronique de Paris |
|
|
14:00 - 15:30 |
› Dependence of magnetic properties of hybrid SMC material on temperature - Sviatoslav Vovk, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia |
|
|
14:00 - 15:30 |
› Determination of Demagnetizing Factors for Complex Geometries using an Iterative Numerical Approach - ETSE Kokouvi, Laboratoire Génie électrique et électronique de Paris |
|
|
14:00 - 15:30 |
› Determination of the magnetic degradation profil on the cutting-edge of punched electrical steels - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 |
|
|
14:00 - 15:30 |
› Effect from Cutting Techniques on Local Magnetic Properties of Electrical Steel - Paul Mallett, MAGMA, Cardiff University School of Engineering |
|
|
14:00 - 15:30 |
› Effect of composition on the transverse susceptibility in multiferroic Z-type hexaferrite nanoparticles - pablo hernandez-gomez, Universidad de Valladolid |
|
|
14:00 - 15:30 |
› Effects of Pulsed Laser Ablation with various patterns on Non-Oriented Electrical Steels Magnetic Properties - Prescillia Dupont, SYMADE - UniLaSalle Amiens, Laboratoire des Technologies Innovantes (EA 3899) - UPJV, Jeumont Electric |
|
|
14:00 - 15:30 |
› Equivalent Circuit Based Model for Mn-Zn Ferrites Taking into Account the Resonance Behaviour - Reda Elkhadrawy, Tampere University, Unit of Electrical Engineering. |
|
|
14:00 - 15:30 |
› Evaluation of the stability of a digital GMI magnetometer - Aktham Asfour, Laboratoire de Génie Electrique de Grenoble |
|
|
14:00 - 15:30 |
› Experimental study of a GOES lamination stack under 3D flux path - Leysmir A. Mirabal, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 (L2EP), EDF - R&D Département ERMES |
|
|
14:00 - 15:30 |
› Field annealing effect of Fe-Si-B-P-Cu-C ribbons and its application to distribution transformer core - YASUO OKAZAKI, Gifu University |
|
|
14:00 - 15:30 |
› Fractional differential material law and fractional diffusion equation for local ferromagnetic lamination hysteresis simulation - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité |
|
|
14:00 - 15:30 |
› Industrial stress annealed wound cores compared to other solutions - Thierry WAECKERLE, Aperam Alloys Imphy - Bashar GONY, Aperam Alloys Amilly - Alain DEMIER, Aperam Alloys Amilly |
|
|
14:00 - 15:30 |
› Influence of stress-relieving methods on the structure and properties of 3D printed FeSi6.5 - Bartosz Jóźwik, Łukasiewicz Research Network - Institute of Non-Ferrous Metals |
|
|
14:00 - 15:30 |
› Interrelation of mechanical properties and magneto-mechanical coupling of non-oriented electrical steel - Nora Leuning, Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany |
|
|
14:00 - 15:30 |
› Investigating laser patterns for GOES submitted to misoriented flux with 2D model, identifications and prototyping - Théo Etifier, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 - Elias Salloum, UNILASALLE Amiens |
|
|
14:00 - 15:30 |
› Magnetic and Magnetocaloric properties of Ho2FeMnO6 nanopowder - Kiran Shinde, Hanbat National University, South Korea |
|
|
14:00 - 15:30 |
› Magnetic and structural evolution of ultra-rapidly annealed highly inductive Fe75.3Ni10Cu0.7B14 alloy - Maciej Kowalczyk, Faculty of Materials Science and Engineering, Warsaw University of Technology |
|
|
14:00 - 15:30 |
› Magnetic Properties Measurement and Comparative Analysis for Soft Magnetic Materials Under Complex Non-Sinusoidal Excitation - Shenghui Mu, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology - Ming Yang, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology |
|
|
14:00 - 15:30 |
› Magneto-induced viscoelastic and plastic flow behavior of carbonyl iron silicon oil-based magnetorheological fluid - Chandra Shekhar Maurya, Indian Institute of Technology Patna, PhD student |
|
|
14:00 - 15:30 |
› Magnetocaloric response in bulk Ni(Co)MnTi Heusler alloys - Victorino Franco, Universidad de Sevilla |
|
|
14:00 - 15:30 |
› Manganese-Zinc Ferrite processed by Digital Light Processing for Power Electronics Application - Alexandre Harmon, Univ. Grenoble Alpes, CEA-LITEN DTNM |
|
|
14:00 - 15:30 |
› Measurement of Magnetic Properties of Nanocrystalline Alloys under High Frequency Pulse Excitation - Min Zhang, Hebei University of Technology [Tianjin] |
|
|
14:00 - 15:30 |
› Mechanical stress estimation through classical and magnetic Barkhausen noise energy hysteresis cycle - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité |
|
|
14:00 - 15:30 |
› Modeling and Measurement of Magneto-Mechanical characteristics in transformer-cores - Elias Salloum, Laboratoire des Technologies Innovantes (LTI), SYMADE - UniLaSalle Amiens |
|
|
14:00 - 15:30 |
› Modeling of the morphic effect using a 1st-order transitional magneto-elastic energy - Julien Taurines, Ecole Normale Supérieure Paris-Saclay |
|
|
14:00 - 15:30 |
› Morphology and Magnetic Properties of Rapidly Quenched Fe-B Alloys - Evangelos Hristoforou, Laboratory of Electronic Sensors, National TU of Athens |
|
|
14:00 - 15:30 |
› New laminated magneto-electric composites - Gabriel Ababei, National Institute of Research and Development for Technical Physics |
|
|
14:00 - 15:30 |
› Non-destructive magnetic flux leakage characterization using non-linear GMI effect - Beato-López J. Jesús, Departamento de Ciencias, Institute for Advanced Materials and Mathematics INAMAT2 Universidad Pública de Navarra, 31006 Pamplona |
|
|
14:00 - 15:30 |
› Origins of the joint losses in GOES magnetic cores - Ronan Corin, Laboratoire Systèmes Electrotechniques et Environnement |
|
|
14:00 - 15:30 |
› Powder loading rate impact on the performances of soft magnetic materials produced by injection moulding - ULRICH SOUPREMANIEN, Université Grenoble Alpes - CEA LITEN |
|
|
14:00 - 15:30 |
› Relationship between the parameters of the hysteresis loop in a soft magnetic material - Vladimir Tsepelev, Ural Federal University [Ekaterinburg] |
|
|
14:00 - 15:30 |
› Soft magnetic composite core properties in normalized representation. - Lajos K. Varga, Wigner Center for Physics, Institute for Solid State Physics and Optics |
|
|
14:00 - 15:30 |
› Soft magnetic composites based on Sendust nanocrystalline powder with Fe3O4 nanoparticles - Traian Florin Marinca, Department of Materials Science and Engineering |
|
|
14:00 - 15:30 |
› Surface magnetic properties of domain structure – thickness dependent behaviour of oriented electrical steels - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 |
|
|
14:00 - 15:30 |
› The Stoner-Wohlfarth model: an analytical approach - Carlo Appino, Istituto Nazionale di Ricerca Metrologica |
|
|
15:30 - 16:00
|
Coffee break (PALLADIUM) |
|
|
16:00 - 16:40
|
Nanocrystalline Soft Magnets: Applications, State-of-Art, and Emerging Trends (AUDITORIUM PLATINE) - Paul Ohodnicki |
|
|
16:40 - 18:00
|
ORAL SESSION N°6 (AUDITORIUM PLATINE) |
(+)
|
|
16:40 - 17:00 |
› Soft magnetic Fe-Sn-B nanocrystalline alloys prepared by rapid annealing - Ivan Skorvanek, Institute of Experimental Physics, Slovak Academy of Sciences |
|
|
17:00 - 17:20 |
› Tuning magnetocaloric properties in the vast high-entropy alloy space - Jia Yan Law, Universidad de Sevilla |
|
|
17:20 - 17:40 |
› 3D printed magnetic-non-magnetic layered structures - Kocsis Bence, Széchenyi István University |
|
|
17:40 - 18:00 |
› Design and modelling of a controlled saturable inductor for an LCC-S compensated WPT system - Luigi Solimene, Politecnico di Torino [Torino] |
|
|
19:00 - 19:15
|
DEPARTURE - Departure by bus from Grenoble to Le Chateau du Touvet |
|
|
19:15 - 23:00
|
GALA DINNER - Gala Dinner at Le Chateau du Touvet |
|
|
23:00 - 23:30
|
DEPARTURE - Departure by Bus from Le Chateau du Touvet to Grenoble |
|
| Time |
Event |
(+)
|
|
08:00 - 08:30
|
WELCOME - Welcoming Participants |
|
|
08:30 - 09:10
|
Love Wave Surface Acoustic Wave Magnetic Field Sensors (AUDITORIUM PLATINE) - Eckhart QUANDT |
|
|
09:10 - 10:50
|
ORAL SESSION N°7 (AUDITORIUM PLATINE) |
(+)
|
|
09:10 - 09:30 |
› Electric current effects in AMR sensors - Guillermo Gestoso Basque Center for Materials, Applications and Nanostructures, Spain |
|
|
09:30 - 09:50 |
› Microscopic Magnetic Domain Structure of GOES at the Vicinity of and On the Laser Lines Post-Laser Treatment with Different Pulse Durations - Manar Nesser, Laboratoire des technologie innovantes |
|
|
09:50 - 10:10 |
› Electrical steel tensile stresses and plastic strains observation through magnetic incremental permeability and eddy current magnetic signature - Shurui Zhang, Graduate School of Engineering, Tohoku University, Sendai, Japan, Tohoku University, Institute of fluid science IFS, Sendai, Japan. - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité |
|
|
10:10 - 10:30 |
› Permeability of amorphous magnetic ribbon - Nikolai Perov, Immanuel Kant Baltic Federal University, Lomonosov Moscow State University |
|
|
10:30 - 10:50 |
› Influence of compressive stress on the high-frequency power loss of MnZn ferrite - Yao Ying, Research Center of Magnetic and Electronic Materials, College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China |
|
|
10:50 - 11:20
|
Coffee break (PALLADIUM) |
|
|
11:20 - 12:50
|
POSTER SESSION N°3 (PALLADIUM) |
(+)
|
|
11:20 - 12:50 |
› 2D magnetoplasmonic crystals NiFe/Si3N4: fabrication and magneto-optical properties - Christina Gritsenko, University of Pavol Jozef Šafárik, Immanuel Kant Baltic Federal University |
|
|
11:20 - 12:50 |
› 3D printed magnetic metal specimens and their structural characterization - Evangelos Hristoforou, Laboratory of Electronic Sensors, National TU of Athens |
|
|
11:20 - 12:50 |
› A setup for the measurement of the GMI response of amorphous wires under tensile stress - Aktham Asfour, Laboratoire de Génie Electrique de Grenoble |
|
|
11:20 - 12:50 |
› Analytical investigation in 3MA linear and non-linear eddy current methods - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany |
|
|
11:20 - 12:50 |
› Characterising non-oriented electrical steel under complex magnetising conditions - Alexander Washbourne, Cardiff University |
|
|
11:20 - 12:50 |
› CIM-like Additive Manufacturing for soft magnetic Mn-Zn ferrite materials - Vincent MARTIN, Laboratoire de Mécanique, Multiphysique, Multiéchelle, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 - Fréderic Gillon, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 |
|
|
11:20 - 12:50 |
› Considering the Mean Path Length on Modelling of Reluctance Actuator for Precision Motion Systems - Kaitlyn Kuchinkaa, Memorial University of Newfoundland - Alatawneh Natheer, Memorial University of Newfoundland - Mohammad Aljanaideh, Memorial University of Newfoundland |
|
|
11:20 - 12:50 |
› Correlation between NDT signatures of steels and their tensile properties - Marwane Dherbécourt, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697, Centre de Recherche VALLOUREC |
|
|
11:20 - 12:50 |
› Design and analysis of electromagnetic suspension for hyperloop - Sigrid Jacobs, ArcelorMittal - Johan Rens, ArcelorMittal |
|
|
11:20 - 12:50 |
› Determination of the magnetic degradation profil on the cutting-edge of punched electrical steels - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 |
|
|
11:20 - 12:50 |
› Determining the order of thermomagnetic phase transitions in low-hysteretic La(Fe,Mn,Si)13 - Victorino Franco, Universidad de Sevilla |
|
|
11:20 - 12:50 |
› Effect of Bending Deformations on Magnetic Properties and Texture Evolution of Fe-Si electrical steels. - Ivan Petryshynets, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, Košice, 04001, Slovakia |
|
|
11:20 - 12:50 |
› Effect of external DC field on anisotropic nanocrystalline ring core - Pavel Ripka, Czech Technical University in Prague |
|
|
11:20 - 12:50 |
› Fe-Cr-Nb-B soft magnetic particles transported by ADSC for cancer treatment - Anca Emanuela Minuti, Faculty of Physics, "Alexandru Ioan Cuza" University, 11 Carol I Boulevard, Iași, 700506, Romania, National Institute of Research and Development for Technical Physics |
|
|
11:20 - 12:50 |
› Frequency study of nanocrystalline Ni3Fe/Cr composites obtained by mechanical milling and spark plasma sintering - Florin popa, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105, Muncii Avenue, 400641, Cluj-Napoca, |
|
|
11:20 - 12:50 |
› From Ring to Stator Core Evaluation - Avo Reinap, Div. Industrial Electrical Engineering and Automation |
|
|
11:20 - 12:50 |
› High frequency application of ultrafine amorphous soft magnetic composites - Li Wangchang, Zhejiang University of Technology |
|
|
11:20 - 12:50 |
› High-frequency characterization of Fe-based nanocrystalline cores - Ferenc Zámborszky, Magnetec-Ungarn Kft. |
|
|
11:20 - 12:50 |
› Identification of Dynamic Magnetic and Electric Circuit models for Inductors - Elias Salloum, Laboratoire des Technologies Innovantes (LTI), SYMADE - UniLaSalle Amiens |
|
|
11:20 - 12:50 |
› Importance of the microstructure of soft magnetic materials for their magnetic behavior - Thomas Kresse, Aalen University |
|
|
11:20 - 12:50 |
› Influence of biaxial stress on magnetostriction – experiments and modelling - Olivier Hubert, Laboratoire de mécanique et technologie |
|
|
11:20 - 12:50 |
› Influence of the Winding System on the Measurement Accuracy for Characterising Soft Magnetic Materials - Christoph Dobler, Johannes Kepler Universität Linz |
|
|
11:20 - 12:50 |
› Influence of thermal and magnetic couplings on magnetocaloric effect in multiphase stacked sample made of La(FeMnSi)13-Hx alloys - Tomasz Przerywacz, Lodz University of Technology, Department of Semiconductor and Optoelectronics Devices, Politechniki Av. 10, 90-924 Łódź, Poland - Roman Gozdur, Łódź University of Technology, Department of Semiconductor and Optoelectronics Devices |
|
|
11:20 - 12:50 |
› Investigation of the Nernst Effect in soft ferromagnetic materials - Łukasz Bernacki, Department of Semiconductor and Optoelectronics Devices, Lodz University of Technology |
|
|
11:20 - 12:50 |
› Magnetic Footprint of Groups of Magnetotactic Bacteria - David de Cos, Department of Physics, University of the Basque Country UPV/EHU, 01006 Vitoria-Gasteiz - Nerea Lete, Department of Electricity and Electronics, University of the Basque Country UPV/EHU, 48940 Leioa, Spain - María Luisa Fdez-Gubieda, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain, Department of Electricity and Electronics, University of the Basque Country UPV/EHU, 48940 Leioa, Spain - Alfredo García-Arribas, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain, Department of Electricity and Electronics, University of the Basque Country UPV/EHU, 48940 Leioa, Spain |
|
|
11:20 - 12:50 |
› Magnetic Material Sprayed by Plasma - Pavel Ctibor, Faculty of Electrical Engineering, Czech Technical University in Prague, Institute of Plasma Physics of the CAS [Prague] |
|
|
11:20 - 12:50 |
› Magnetic property degradation of electrical steel due to coupled heat and stress - Paul Mallett, MAGMA, Cardiff University School of Engineering |
|
|
11:20 - 12:50 |
› Magnetic Thin Band Sensors – Synopsis of Development - Georgi Shilyashki, TU Wien, Institute EMCE (354) |
|
|
11:20 - 12:50 |
› Magnetodielectric materials for VHF antenna devices tunable by a low DC magnetic field - Jean-Luc MATTEI, Laboratoire des sciences et techniques de l'information, de la communication et de la connaissance |
|
|
11:20 - 12:50 |
› Micromagnetic modelling of magnetostriction under uniaxial stress - Inna Lobanova, University Grenoble Alpes |
|
|
11:20 - 12:50 |
› Modeling and Analysis of Asymmetrical Air Gaps of Reluctance Actuators for Nano-Positioning Systems - Mohammad Aljanaideh, Memorial University of Newfoundland |
|
|
11:20 - 12:50 |
› New investigation in Loss Surface model to consider dynamic magnetization's history - Arnaud Cariou, Laboratoire de Génie Electrique de Grenoble, IRT Saint Exupéry - Institut de Recherche Technologique |
|
|
11:20 - 12:50 |
› Non-destructive magnetic flux leakage characterization using non-linear GMI effect - Beato-López J. Jesús, Departamento de Ciencias, Institute for Advanced Materials and Mathematics INAMAT2 Universidad Pública de Navarra, 31006 Pamplona |
|
|
11:20 - 12:50 |
› Optimization of Specimen Shape for Investigation the Influence of Mechanical Stress on Soft Magnetic Material Properties - Gereon Goldbeck, Johannes Kepler Universität Linz |
|
|
11:20 - 12:50 |
› Perpendicular magnetocrystalline anisotropy of the Co2Fe0.4Mn0.6Si Heusler alloy thin films of different thicknesses - Oleksandr Chumak, Institute of Physics, Polish Academy of Sciences |
|
|
11:20 - 12:50 |
› Relative control of domains structure and phases in electrical steels by laser process parameters and patterns - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 |
|
|
11:20 - 12:50 |
› Soft magnetic composite cores produced by spark plasma sintering from pseudo core-shell powders like Me@MeFe2O4 type - Ionel Chicinas, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105 Muncii Ave. |
|
|
11:20 - 12:50 |
› Stress Analysis via pancake Eddy Current Technology - meziane hamel, Université M\'Hamed Bougara Boumerdes |
|
|
11:20 - 12:50 |
› The effect of laser scribing spacing on core loss of grain oriented electrical steel - Adriano Alex de Almeida, Research Center Aperam South America |
|
|
11:20 - 12:50 |
› The role of materials in the optimal design of magnetic components for power converters - Luigi Solimene, Politecnico di Torino [Torino] |
|
|
11:20 - 12:50 |
› Time-resolved observations of a domain wall distrotions induced by torsion - Richter Kornel, Pavol Jozef Šafárik University |
|
|
12:50 - 13:50
|
Lunch (TITANE) |
|
|
13:50 - 14:30
|
Recent developments on soft magnetic ferrites (AUDITORIUM PLATINE) - Vassilis Zaspalis |
|
|
14:30 - 15:30
|
ORAL SESSION N°8 (AUDITORIUM PLATINE) |
(+)
|
|
14:30 - 14:50 |
› First-Order Reversal Curve Approach to Soft Magnetic Ferrite-Bonded Iron Composites - Samuel Dobák, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia |
|
|
14:50 - 15:10 |
› Application development of the Fe50Ni50 alloy - Thierry WAECKERLE, APERAM Alloys Imphy - Yanick ATEBA BETANDA, APERAM Alloys - Alain DEMIER, APERAM Alloys |
|
|
15:10 - 15:30 |
› Optimal Use of the GOES Easy Magnetisation Direction in PMSM Segmented Magnetic Circuit - Abderrahmane REBHAOUI, Laboratoire Systèmes Electrotechniques et Environnement, Institut VEDECOM |
|
|
15:30 - 16:00
|
CLOSING TALK (AUDITORIUM PLATINE) |
|
|
16:00 - 17:30
|
Coffee break (PALLADIUM) |
|
|
Loading...