Lost password ? Create account

Main menu

Sponsors & Exhibitors

Information for authors

Digest submission

Full papers informations

Information for Contributors

HELP

@ Contact

Provisional Planning

Week Mon. 02 Tue. 03 Wed. 04 Thu. 05 List

‹ Tuesday, May 3, 2022 ›

08:00

09:00

10:00

11:00

12:00

13:00

14:00

15:00

16:00

17:00

18:00

›8:00 (1h)

WELCOME

8:00 - 9:00 (1h)

WELCOME

Welcoming Participants

›9:00 (20min)

OPENING TALK
Afef Kedous-Lebouc

› AUDITORIUM PLATINE

9:00 - 9:20 (20min)

OPENING TALK

AUDITORIUM PLATINE

Afef Kedous-Lebouc

›9:20 (40min)

Material investigation for the next generation electrical traction machines
Sigrid JACOBS

› AUDITORIUM PLATINE

9:20 - 10:00 (40min)

Material investigation for the next generation electrical traction machines

AUDITORIUM PLATINE

Sigrid JACOBS

https://smm25.sciencesconf.org/data/program/SigridJacobs.pdf

›10:00 (1h)

ORAL SESSION N°1

› AUDITORIUM PLATINE

10:00 - 11:00 (1h)

ORAL SESSION N°1

AUDITORIUM PLATINE

› Characterization of electrical steel deterioration due to combined punching and elastic stress - 10:00-10:20 (20min)

› Composition engineering of ultra-soft-magnetic Co-based alloys - 10:20-10:40 (20min)

› Novel Measuring Concept for Determining the Chemical Composition of Bulk Materials in Industry - 10:40-11:00 (20min)

›11:00 (30min)

Coffee break

› PALLADIUM

11:00 - 11:30 (30min)

Coffee break

PALLADIUM

›11:30 (40min)

Ferromagnetic shape memory Heuslers: a journey from bulk to nano
Franca ALBERTINI

› AUDITORIUM PLATINE

11:30 - 12:10 (40min)

Ferromagnetic shape memory Heuslers: a journey from bulk to nano

AUDITORIUM PLATINE

Franca ALBERTINI

https://smm25.sciencesconf.org/data/program/FrancaAlbertini.pdf

›12:10 (1h)

ORAL SESSION N°2

› AUDITORIUM PLATINE

12:10 - 13:10 (1h)

ORAL SESSION N°2

AUDITORIUM PLATINE

› Low temperature annealing enhancing the magnetocaloric response of FeMnNiGeSi HEAs - Álvaro Díaz-García, Universidad de Sevilla 12:10-12:30 (20min)

› Opportunities and Challenges for Soft Magnetic Composite in E-mobilities - Zhou Ye, EMT, Höganäs AB, SE-26383, Höganäs 12:30-12:50 (20min)

› Hydrodynamic simulations of magnetic nanoparticles nanoassemblies for magnetic biosensing - Pablo Palacios Alonso, Instituto IMDEA Nanociencia [Madrid], Departamento de Física Teórica de la Materia Condensada [Madrid] 12:50-13:10 (20min)

›13:10 (1h)

Lunch

› TITANE

13:10 - 14:10 (1h)

Lunch

TITANE

›14:10 (1h30)

POSTER SESSION N°1

› PALLADIUM

14:10 - 15:40 (1h30)

POSTER SESSION N°1

PALLADIUM

› A modified Arctangent Hysteresis Model for Residual Stress Description - Ahmed Nait Ouslimane, Université Mouloud Mammeri [Tizi Ouzou] - meziane hamel, Université M\'Hamed Bougara Boumerdes - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany 14:10-15:40 (1h30)

› Assessment of magnetoelastic resonance parameters retrieval for sensor applications - Beatriz Sisniega, Universidad del Pais Vasco / Euskal Herriko Unibertsitatea [Espagne] 14:10-15:40 (1h30)

› Core loss reduction through a laser treatment on Fe-based amorphous ribbon surface for transformer cores - Naoki Ito, Hitachi Metals, Ltd. 14:10-15:40 (1h30)

› Discriminating the physical impacts of various laser pulses on the magnetic structure of oriented electrical steels - olivier Maloberti, Laboratoire des technologies innovantes - UR UPJV 3899, UNILASALLE Amiens 14:10-15:40 (1h30)

› Domain Observation of Grain-Oriented Electrical Steel Sheets - Morris Lindner, INNOVENT e.V. - Timmy Reimann, INNOVENT e.V. - Benjamin Wenzel, Matesy GmbH - Rocco Holzhey, INNOVENT e.V. 14:10-15:40 (1h30)

› Effect of Sheet Slitting on the Energy Loss of Laser-Scribed Grain - Oriented Fe-Si - Gheorghe Paltanea, University Politehnica of Bucharest 14:10-15:40 (1h30)

› Effects of clinching and welding on iron loss distribution in hybrid motor cores - hiroyasu shimoji, Oita university Faculty of science and technology, Oita Industrial Research Institute 14:10-15:40 (1h30)

› Experimental Off-diagonal GMI sensor temperature drift versus theoretical modelling - Mamaye Inès Corréa, Ecole superieure polytechnique de dakar (esp-ucad) - Papa Silly Traore, Ecole superieure polytechnique de dakar (esp-ucad) - Olivier Mareschal, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen - Christophe Dolabdjian, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen 14:10-15:40 (1h30)

› Fast Domain Walls in Magnetostrictive Amorphous Nanowires - Tibor-Adrian Óvári, National Institute of R&D for Technical Physics 14:10-15:40 (1h30)

› Flux density waveform control based on Newton-Rhapson method - Clémentine Delaunay, Ampère 14:10-15:40 (1h30)

› Full permeability tensor identification for numerical simulation of GOES - Leysmir A. Mirabal, EDF - R&D Département ERMES, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 (L2EP) 14:10-15:40 (1h30)

› High throughput analysis of combinatorially sputtered soft magnetic metallic glasses using MOKE - Julia Löfstrand, Uppsala Universitet [Uppsala] 14:10-15:40 (1h30)

› Influence of cutting clearance on the magnetic properties in non-oriented electrical steel - Ján Füzer, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia 14:10-15:40 (1h30)

› Influence of plastic compression on the magnetic behaviour of a pipeline steel - zakariae Maazaz, Laboratoire de mécanique et technologie - Olivier Hubert, Laboratoire de mécanique et technologie - Olivier de la Barriere, Systèmes et Applications des Technologies de lÍnformation et de lÉnergie 14:10-15:40 (1h30)

› Influence of volumetric energy density on the magnetic properties of FeSi6.5 alloy prepared by SLM technology - Adrian Radon, Łukasiewicz Research Network - Institute of Non-Ferrous Metals 14:10-15:40 (1h30)

› Investigation on optimal building factor as a function of core geometry and operational flux density - Sudheer Mokkapaty, SGB-SMIT Group (SBG), Neumark, - Ahmed Gamil, SGB-SMIT Group (SGB), Regensburg, - Timo Overboom, SGB-SMIT Group (Royal SMIT), Nijmegen, 14:10-15:40 (1h30)

› J-H loop tracer for demagnetization-corrected hysteresis measurements of cylinders and rectangular prisms - Markus Kuhnt, Institut Dr. Foerster GmbH & Co. KG 14:10-15:40 (1h30)

› Local Magnetic Characterization of Electromagnetic Pulse Treated Metal: an Inhomogeneous Measurement - Plantevin Loup, Laboratoire Ampère 14:10-15:40 (1h30)

› Local Magnetic Properties of Shear Cut Non-Oriented Electrical Steel Sheets - Fabian Hummel, Department of Materials Science & Engineering, Institute I: General Materials Properties, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen 14:10-15:40 (1h30)

› Magnetic behaviour of GOES wound cores of transformers fed by square or sine voltages - Daniel Roger, Univ. Artois, ER4025, Laboratoire Systèmes Electrotechniques et Environnement - LSEE 14:10-15:40 (1h30)

› Magnetic Hysteresis: A Reliable Technique for Condition Monitoring of Magnetic Cores - Hamed Hamzehbahmani, Durham University 14:10-15:40 (1h30)

› Magnetic Properties and Barkhausen Noise Evolution during FeSiCuNbB Nanocrystalline Materials Ageing - Rania SAOUDI, Laboratoire Ampère - Laurent Morel, Laboratoire Ampère - Marie-Ange Raulet, Laboratoire Ampère - benjamin Ducharne, Laboratoire de Génie Electrique et Ferroélectricité 14:10-15:40 (1h30)

› Magnetic Property Measurement and Analysis on Temperature Dependence of High-Frequency Magnetic Materials Under Non-sinusoidal Excitation - Ming Yang, State Key Lab. of Reliability and Intelligence of Electric Equipment，Hebei University of Technology 14:10-15:40 (1h30)

› Magneto-optical characterization of grain oriented SiFe lamination under rotational magnetic field - 14:10-15:40 (1h30)

› Magnetoquasistatic Multiscale Modelling of SMC Materials Using EH-Conforming Formulation and Multiharmonic Method - Janne Ruuskanen, Tampere University 14:10-15:40 (1h30)

› MIM-like Additive Manufacturing of Fe3%Si magnetic materials - Vincent MARTIN, Laboratoire de Mécanique, Multiphysique, Multiéchelle, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 14:10-15:40 (1h30)

› Mn-Zn ferrite nanoparticles ink for inkjet printing - Alexandr Laposa, Czech Technical University in Prague 14:10-15:40 (1h30)

› Modelling of iron loss evolution due to magnetic ageing in FeSi electrical steels - Meryeme JAMIL, Laboratoire d'Électrotechnique et d'Électronique de Puissance - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - Abdelkader Benabou, Laboratoire d'Électrotechnique et d'Électronique de Puissance 14:10-15:40 (1h30)

› New Formulation of Dynamic LS Model for Accurate Iron Loss Modeling at High B and dB/dt - Anh Tuan VO, Laboratoire de Génie Electrique de Grenoble 14:10-15:40 (1h30)

› Next generation electrical traction machines: material investigation for optimal machine performance - Sigrid Jacobs, ArcelorMittal 14:10-15:40 (1h30)

› Optimization of the signal to noise ratio for fundamental mode orthogonal fluxgate magnetometer based on amorphous wires - Tibu Mihai, National Institute of Research and Development for Technical Physics Iasi 14:10-15:40 (1h30)

› Sensitivity and noise of parallel fluxgate sensor with amorphous wire cores - Diana Hrakova, Faculty of Electrical Engineering, Czech Technical University in Prague 14:10-15:40 (1h30)

› Soft magnetic properties of the ultrarapidly annealed (Fe64Co21B15)99Cu1 high-Bs alloy - Branislav Kunca, Institute of Experimental Physics, Slovak Academy of Sciences 14:10-15:40 (1h30)

› Temperature First Order Reversal Curves (TFORC) distributions of magnetocaloric materials - Luis M. Moreno-Ramírez, Universidad de Sevilla 14:10-15:40 (1h30)

› Transverse LVDT Position Sensor with Nanocrystalline Core - Vaclav Grim, Czech Technical University in Prague 14:10-15:40 (1h30)

› Vector Hysteresis Measurement of the Magneto-Mechanical Coupling at Different Angles between Magnetization and Mechanical Stress - Benedikt Schauerte, Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany 14:10-15:40 (1h30)

›15:40 (30min)

Coffee break

› PALLADIUM

15:40 - 16:10 (30min)

Coffee break

PALLADIUM

›16:10 (40min)

Recent development in processing and application of Fe-6.5%Si soft magnetic material
Gaoyuan OUYANG

› AUDITORIUM PLATINE

16:10 - 16:50 (40min)

Recent development in processing and application of Fe-6.5%Si soft magnetic material

AUDITORIUM PLATINE

Gaoyuan OUYANG

https://smm25.sciencesconf.org/data/program/Ouyang.pdf

›16:50 (1h40)

ORAL SESSION N°3

› AUDITORIUM PLATINE

16:50 - 18:30 (1h40)

ORAL SESSION N°3

AUDITORIUM PLATINE

› Influence of Si-Si pairs on stress annealing performance - Mateus Dias, Department of Metallurgical and Materials Engineering, Universidade de São Paulo, Brazil - Fernando Landgraf, Department of Metallurgical and Materials Engineering, Universidade de São Paulo, Brazil 16:50-17:10 (20min)

› Analysis of magnetic properties degradation following industrial impregnation process - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 17:10-17:30 (20min)

› Establishment of the Standard Method of Magnetostriction Measurement of Grain-oriented Electrical Steel Strip and Sheet - Stefan Siebert, Brockhaus Measurements, Lüdenscheid, 58507, Germany 17:30-17:50 (20min)

› Modelling of stator sheets punching effect on EV motor performances - Patrick LOMBARD, Altair 17:50-18:10 (20min)

› Mechanically strong and ductile soft magnet with ultralow coercivity - liuliu Han, Max-Planck-Institut für Eisenforschung GmbH 18:10-18:30 (20min)

Session

Speech

Logistics

Break

Tour

Online user: 1

Privacy