Lost password ? Create account

Main menu

Sponsors & Exhibitors

Information for authors

Digest submission

Full papers informations

Information for Contributors

HELP

@ Contact

Provisional Planning

Week Mon. 02 Tue. 03 Wed. 04 Thu. 05 List

‹ Wednesday, May 4, 2022 ›

08:00

09:00

10:00

11:00

12:00

13:00

14:00

15:00

16:00

17:00

18:00

19:00

20:00

21:00

22:00

23:00

›8:00 (30min)

WELCOME

8:00 - 8:30 (30min)

WELCOME

Welcoming Participants

›8:30 (40min)

Additive manufacturing of soft magnetic materials and components
Dagmar GOLL

› AUDITORIUM PLATINE

8:30 - 9:10 (40min)

Additive manufacturing of soft magnetic materials and components

AUDITORIUM PLATINE

Dagmar GOLL

https://smm25.sciencesconf.org/data/program/DagmarGoll.pdf

›9:10 (1h20)

ORAL SESSION N°4

› AUDITORIUM PLATINE

9:10 - 10:30 (1h20)

ORAL SESSION N°4

AUDITORIUM PLATINE

› Lessons Learnt - Additive Manufacturing of Iron Cobalt Based Soft Magnetic Materials - Tomi Lindroos, VTT Technical Research Centre of Finland Ltd. 09:10-09:30 (20min)

› Domain structure and magnetic properties of glass-coated Fe-based microwires - Valeria Kolesnikova, Immanuel Kant Baltic Federal University 09:30-09:50 (20min)

› Magnetic losses and aftereffect in Ni-Zn ferrites - Samuel Dobák 09:50-10:10 (20min)

› Evaluation of IPM motor using newly-developed Si-gradient steel (JNRF) - Yoshiaki Zaizen, JFE Steel Corporation 10:10-10:30 (20min)

›10:30 (30min)

Coffee break

› PALLADIUM

10:30 - 11:00 (30min)

Coffee break

PALLADIUM

›11:00 (40min)

Biomedical Applications of magnetoactive smart materials: You are what you synthesize
Pedro MARTINS

› AUDITORIUM PLATINE

11:00 - 11:40 (40min)

Biomedical Applications of magnetoactive smart materials: You are what you synthesize

AUDITORIUM PLATINE

Pedro MARTINS

https://smm25.sciencesconf.org/data/program/PedroMartins.pdf

›11:40 (1h20)

ORAL SESSION N°5

› AUDITORIUM PLATINE

11:40 - 13:00 (1h20)

ORAL SESSION N°5

AUDITORIUM PLATINE

› Fe-Co soft magnetic nanowires for cancer cell destruction by magneto-mechanical actuation - Horia Chiriac, National Institute of Research and Development for Technical Physics 11:40-12:00 (20min)

› FexCo1-x alloy nanoparticles: synthesis, structure, magnetic characterization and magnetorheological application - JON GUTIERREZ, Universidad del Pais Vasco / Euskal Herriko Unibertsitatea [Espagne] 12:00-12:20 (20min)

› High-Moment Films Produced by Depositing Gas-Phase Nanoparticles - Raúl Lopez-Martin, Universidad de Castilla-La Mancha 12:20-12:40 (20min)

› Fibres-based SMCs prepared via cold sintering - Bogdan Viorel Neamtu, Technical University of Cluj-Napoca, Materials Science and Engineering Department, 103-105, Muncii Avenue, 400641, Cluj-Napoca, 12:40-13:00 (20min)

›13:00 (1h)

Lunch

› TITANE

13:00 - 14:00 (1h)

Lunch

TITANE

›14:00 (1h30)

POSTER SESSION N°2

› PALLADIUM

14:00 - 15:30 (1h30)

POSTER SESSION N°2

PALLADIUM

› A comparison between ABC method and PSO method for Hysteresis Parameter determination - Dounia Sedira, Laboratoire d'étude et de modélisation en électrotechnique, Faculté des sciences et de la technologie,Université Mohamed Seddik Ben Yahia, BP98, Jijel 18000, Algeria - Yasmine GABI, Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3, 66123 Saarebruecken, Germany - Afef Kedous-Lebouc, Univ. Grenoble Alpes, CNRS, Grenoble INP, G2Elab, F-38000 Grenoble, France21 avenue des Martyrs CS 90624, Grenoble 38031, France 14:00-15:30 (1h30)

› A New Hysteresis Model for characterising Grain- Oriented Electrical Steels - Hamed Hamzehbahmani, Durham University 14:00-15:30 (1h30)

› About the exothermic nanocrystallisation of FeCuNbSiB cores - Olivier Geoffroy, Univ. Grenoble Alpes, G2Elab, CNRS, France 14:00-15:30 (1h30)

› Broadband losses and their interpretation in thin GO sheets - Alessandro Sola, Istituto Nazionale di Ricerca Metrologica 14:00-15:30 (1h30)

› Characterization of the magneto-plastic behavior of electrical steels - Mathieu Domenjoud, Laboratoire Génie électrique et électronique de Paris 14:00-15:30 (1h30)

› Dependence of magnetic properties of hybrid SMC material on temperature - Sviatoslav Vovk, Institute of Physics, Faculty of Science, Pavol Jozef Šafárik University in Košice, Park Angelinum 9, Košice, 04154, Slovakia 14:00-15:30 (1h30)

› Determination of Demagnetizing Factors for Complex Geometries using an Iterative Numerical Approach - ETSE Kokouvi, Laboratoire Génie électrique et électronique de Paris 14:00-15:30 (1h30)

› Determination of the magnetic degradation profil on the cutting-edge of punched electrical steels - Hugo Helbling, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 14:00-15:30 (1h30)

› Effect from Cutting Techniques on Local Magnetic Properties of Electrical Steel - Paul Mallett, MAGMA, Cardiff University School of Engineering 14:00-15:30 (1h30)

› Effect of composition on the transverse susceptibility in multiferroic Z-type hexaferrite nanoparticles - pablo hernandez-gomez, Universidad de Valladolid 14:00-15:30 (1h30)

› Effects of Pulsed Laser Ablation with various patterns on Non-Oriented Electrical Steels Magnetic Properties - Prescillia Dupont, SYMADE - UniLaSalle Amiens, Laboratoire des Technologies Innovantes (EA 3899) - UPJV, Jeumont Electric 14:00-15:30 (1h30)

› Equivalent Circuit Based Model for Mn-Zn Ferrites Taking into Account the Resonance Behaviour - Reda Elkhadrawy, Tampere University, Unit of Electrical Engineering. 14:00-15:30 (1h30)

› Evaluation of the stability of a digital GMI magnetometer - Aktham Asfour, Laboratoire de Génie Electrique de Grenoble 14:00-15:30 (1h30)

› Experimental study of a GOES lamination stack under 3D flux path - Leysmir A. Mirabal, Laboratoire d'Électrotechnique et d'Électronique de Puissance - ULR 2697 (L2EP), EDF - R&D Département ERMES 14:00-15:30 (1h30)

› Field annealing effect of Fe-Si-B-P-Cu-C ribbons and its application to distribution transformer core - YASUO OKAZAKI, Gifu University 14:00-15:30 (1h30)

› Fractional differential material law and fractional diffusion equation for local ferromagnetic lamination hysteresis simulation - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité 14:00-15:30 (1h30)

› Industrial stress annealed wound cores compared to other solutions - Thierry WAECKERLE, Aperam Alloys Imphy - Bashar GONY, Aperam Alloys Amilly - Alain DEMIER, Aperam Alloys Amilly 14:00-15:30 (1h30)

› Influence of stress-relieving methods on the structure and properties of 3D printed FeSi6.5 - Bartosz Jóźwik, Łukasiewicz Research Network - Institute of Non-Ferrous Metals 14:00-15:30 (1h30)

› Interrelation of mechanical properties and magneto-mechanical coupling of non-oriented electrical steel - Nora Leuning, Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany 14:00-15:30 (1h30)

› Investigating laser patterns for GOES submitted to misoriented flux with 2D model, identifications and prototyping - Théo Etifier, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 - Elias Salloum, UNILASALLE Amiens 14:00-15:30 (1h30)

› Magnetic and Magnetocaloric properties of Ho2FeMnO6 nanopowder - Kiran Shinde, Hanbat National University, South Korea 14:00-15:30 (1h30)

› Magnetic and structural evolution of ultra-rapidly annealed highly inductive Fe75.3Ni10Cu0.7B14 alloy - Maciej Kowalczyk, Faculty of Materials Science and Engineering, Warsaw University of Technology 14:00-15:30 (1h30)

› Magnetic Properties Measurement and Comparative Analysis for Soft Magnetic Materials Under Complex Non-Sinusoidal Excitation - Shenghui Mu, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology - Ming Yang, State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology 14:00-15:30 (1h30)

› Magneto-induced viscoelastic and plastic flow behavior of carbonyl iron silicon oil-based magnetorheological fluid - Chandra Shekhar Maurya, Indian Institute of Technology Patna, PhD student 14:00-15:30 (1h30)

› Magnetocaloric response in bulk Ni(Co)MnTi Heusler alloys - Victorino Franco, Universidad de Sevilla 14:00-15:30 (1h30)

› Manganese-Zinc Ferrite processed by Digital Light Processing for Power Electronics Application - Alexandre Harmon, Univ. Grenoble Alpes, CEA-LITEN DTNM 14:00-15:30 (1h30)

› Measurement of Magnetic Properties of Nanocrystalline Alloys under High Frequency Pulse Excitation - Min Zhang, Hebei University of Technology [Tianjin] 14:00-15:30 (1h30)

› Mechanical stress estimation through classical and magnetic Barkhausen noise energy hysteresis cycle - benjamin Ducharne, ELyTMaX UMI 3757, CNRS – Université de Lyon – Tohoku University, International Joint Unit, Tohoku University, Laboratoire de Génie Electrique et Ferroélectricité 14:00-15:30 (1h30)

› Modeling and Measurement of Magneto-Mechanical characteristics in transformer-cores - Elias Salloum, Laboratoire des Technologies Innovantes (LTI), SYMADE - UniLaSalle Amiens 14:00-15:30 (1h30)

› Modeling of the morphic effect using a 1st-order transitional magneto-elastic energy - Julien Taurines, Ecole Normale Supérieure Paris-Saclay 14:00-15:30 (1h30)

› Morphology and Magnetic Properties of Rapidly Quenched Fe-B Alloys - Evangelos Hristoforou, Laboratory of Electronic Sensors, National TU of Athens 14:00-15:30 (1h30)

› New laminated magneto-electric composites - Gabriel Ababei, National Institute of Research and Development for Technical Physics 14:00-15:30 (1h30)

› Non-destructive magnetic flux leakage characterization using non-linear GMI effect - Beato-López J. Jesús, Departamento de Ciencias, Institute for Advanced Materials and Mathematics INAMAT2 Universidad Pública de Navarra, 31006 Pamplona 14:00-15:30 (1h30)

› Origins of the joint losses in GOES magnetic cores - Ronan Corin, Laboratoire Systèmes Electrotechniques et Environnement 14:00-15:30 (1h30)

› Powder loading rate impact on the performances of soft magnetic materials produced by injection moulding - ULRICH SOUPREMANIEN, Université Grenoble Alpes - CEA LITEN 14:00-15:30 (1h30)

› Relationship between the parameters of the hysteresis loop in a soft magnetic material - Vladimir Tsepelev, Ural Federal University [Ekaterinburg] 14:00-15:30 (1h30)

› Soft magnetic composite core properties in normalized representation. - Lajos K. Varga, Wigner Center for Physics, Institute for Solid State Physics and Optics 14:00-15:30 (1h30)

› Soft magnetic composites based on Sendust nanocrystalline powder with Fe3O4 nanoparticles - Traian Florin Marinca, Department of Materials Science and Engineering 14:00-15:30 (1h30)

› Surface magnetic properties of domain structure – thickness dependent behaviour of oriented electrical steels - olivier Maloberti, UNILASALLE Amiens, Laboratoire des technologies innovantes - UR UPJV 3899 14:00-15:30 (1h30)

› The Stoner-Wohlfarth model: an analytical approach - Carlo Appino, Istituto Nazionale di Ricerca Metrologica 14:00-15:30 (1h30)

›15:30 (30min)

Coffee break

› PALLADIUM

15:30 - 16:00 (30min)

Coffee break

PALLADIUM

›16:00 (40min)

Nanocrystalline Soft Magnets: Applications, State-of-Art, and Emerging Trends
Paul Ohodnicki

› AUDITORIUM PLATINE

16:00 - 16:40 (40min)

Nanocrystalline Soft Magnets: Applications, State-of-Art, and Emerging Trends

AUDITORIUM PLATINE

Paul Ohodnicki

https://smm25.sciencesconf.org/data/program/PaulOhodnicki_1.pdf

›16:40 (1h20)

ORAL SESSION N°6

› AUDITORIUM PLATINE

16:40 - 18:00 (1h20)

ORAL SESSION N°6

AUDITORIUM PLATINE

› Soft magnetic Fe-Sn-B nanocrystalline alloys prepared by rapid annealing - Ivan Skorvanek, Institute of Experimental Physics, Slovak Academy of Sciences 16:40-17:00 (20min)

› Tuning magnetocaloric properties in the vast high-entropy alloy space - Jia Yan Law, Universidad de Sevilla 17:00-17:20 (20min)

› 3D printed magnetic-non-magnetic layered structures - Kocsis Bence, Széchenyi István University 17:20-17:40 (20min)

› Design and modelling of a controlled saturable inductor for an LCC-S compensated WPT system - Luigi Solimene, Politecnico di Torino [Torino] 17:40-18:00 (20min)

›19:00 (15min)

DEPARTURE

19:00 - 19:15 (15min)

DEPARTURE

Departure by bus from Grenoble to Le Chateau du Touvet

›19:15 (3h45)

GALA DINNER

19:15 - 23:00 (3h45)

GALA DINNER

›23:00 (30min)

DEPARTURE

23:00 - 23:30 (30min)

DEPARTURE

Departure by Bus from Le Chateau du Touvet to Grenoble

Session

Speech

Logistics

Break

Tour

Online user: 1

Privacy